iSpindel™

iSpindle doesn't work, I don't see any information
The best way to find out what the iSpindle is doing as information is to read it's log. This can be done via a serial monitor like HTerm or Arduino IDE...
Wed, 8 Apr, 2020 at 10:54 AM
How to navigatet to iSpindle - portal
Switch it on, press the reset button 3-4 times which sets up an access point. That means you will see a new Wifi network "iSpindel" where you conn...
Wed, 8 Apr, 2020 at 10:56 AM
Why can't I access the iSpindle in normal operation
The critical part of the battery life time is that the iSpindle is active as short as possible and maximum time being in deep sleep mode, this save much bat...
Wed, 8 Apr, 2020 at 10:55 AM
The Micro USB port is for program updates?
Correct, see Firmware Update
Wed, 8 Apr, 2020 at 10:56 AM
How can I calibrate the voltage display?
From firmware 3.0 on you can adjust the conversion factor. By default, factor 191.8 is used. You can adjust by this formula: displayed voltage / measured vo...
Wed, 8 Apr, 2020 at 10:57 AM
Can I operate iSpindle in a stainless steel container?
Is it possible to get signal through the stainless steel container? Yes
Wed, 8 Apr, 2020 at 10:57 AM